Options  

Option  Param  Description  
i  ignore  Ignore non existing source files without warning.  
N  nocheck  Do not make plausibility checks for KCL files.  
B  brief  Suppress the output of the triangle list and print only the header data and statistics.  
l  long  If set, append an octree dump to the output. If set twice, add a triangle usage list behind the octree dump.  
c  const  list  Define constant values, that are used by the internal encoders and by the numeric options as predefined global variables. This option allows a conditional encoding of text files. It can be used multiple times for multiple definitions.
The parameter is a comma separated list of terms and a term is ' 
scale  vector[@origin]  Transform the data: Scale all coordinates and size values by 'vector' relative to the point 'origin'. If the origin is not set, Negative values mirror the coordinates. Each parameter is either a vector expression or a comma separated expression list of coordinates ('x,z' or 'x,y,z'). Transformations are calculated in the order SCALE, SHIFT, ROTATE, TRANSLATE. 

shift  vector  Transform the data: Add 'vector' to all coordinates. It's simlar to translate, but the addition is done before rotation. The parameter is either a vector expression or a comma separated expression list of coordinates ('x,z' or 'x,y,z').
Transformations are calculated in the order SCALE, SHIFT, ROTATE, TRANSLATE. 

xss  x1old,x1new,x2old,x2new  xss (xscaleshift) calculates the X values of scale and shift, so that old values are transformed to the new values. The parameters are numbers or expression.  
yss  y1old,y1new,y2old,y2new  yss (yscaleshift) calculates the Y values of scale and shift, so that old values are transformed to the new values. The parameters are numbers or expression.  
zss  z1old,z1new,z2old,z2new  zss (zscaleshift) calculates the Z values of scale and shift, so that old values are transformed to the new values. The parameters are numbers or expression.  
rot  degree[@origin]  Transform the data: Rotate all coordinates and rotation values by the angle 'degree' (is a vector) around the 3 axes. All 3 axes goes through the point 'origin'. If the origin is not set, Each parameter is either a vector expression or a comma separated expression list of coordinates ('x,y,z'). Option rot is an alternative for xrot, yrot and zrot to define all 3 rotations in one step. Transformations are calculated in the order SCALE, SHIFT, XROTATE, YROTATE, ZROTATE, TRANSLATE. 

xrot  degree[@origin]  Transform the data: Rotate all coordinates and rotation values by the angle 'degree' around the xaxis, that goes through the point 'origin'. If the origin is not set, Each parameter is either a vector expression or a comma separated expression list of coordinates ('y,z' or 'x,y,z'). Transformations are calculated in the order SCALE, SHIFT, XROTATE, YROTATE, ZROTATE, TRANSLATE. 

yrot  degree[@origin]  Transform the data: Rotate all coordinates and rotation values by the angle 'degree' around the xaxis, that goes through the point 'origin'. If the origin is not set, Each parameter is either a vector expression or a comma separated expression list of coordinates ('x,z' or 'x,y,z'). Transformations are calculated in the order SCALE, SHIFT, XROTATE, YROTATE, ZROTATE, TRANSLATE. 

zrot  degree[@origin]  Transform the data: Rotate all coordinates and rotation values by the angle 'degree' around the zaxis, that goes through the point 'origin'. If the origin is not set, Each parameter is either a vector expression or a comma separated expression list of coordinates ('x,y' or 'x,y,z'). Transformations are calculated in the order SCALE, SHIFT, XROTATE, YROTATE, ZROTATE, TRANSLATE. 

translate  vector  Transform the data: Add 'vector' to all coordinates. It's simlar to shift, but the addition is done after rotation. The parameter is either a vector expression or a comma separated expression list of coordinates ('x,z' or 'x,y,z'). Transformations are calculated in the order SCALE, SHIFT, ROTATE, TRANSLATE. 

null  Create a neutral transformation without affecting the coordinates. The only influence is, that the dependent values (like maximum) are recalculated as if a transformation has taken place.  
next  Close the current transformation step with all scaling, shifting, rotation and translation options and open a new step with cleared options. On transformation each step is logical done one by one. In real, one total transformation matrix is calculated and used for fast transformations.
If option next is used, the ability for modifying the scale and rotation vectors (not the positions) of different KMP sections is nearly always lost. A warning is printed if this occurs. 

ascale  factor@dir  Transform the data and do an axis scale: Close the current transformation step like next and scale the data by This kind of transformation is EXPERIMENTAL! 

arot  degree[@pos1]@pos2  Transform the data and do an axis rotation: Close the current transformation step like next and rotate the data by This kind of transformation is EXPERIMENTAL! 

tformscript  script  Load the script and execute it by the text parser.
Then for each coordinate (2D and 3D), call the macro
For each file, macro Before each macro call, the private and local variables are cleared and only global parameters are permanent. The zero based index is cleared for each new source. The parameters of the macro calls are defined in the local name space. 

kcl  list  Set global options for KCL processing. Parameter
Keyword 

kclflag  joblist  Modify the KCL flag of KCL files. A comma separated job list in the format
All KCL flags of the source list are assigned to the new value 

kclscript  script  After reading a KCL source file and executing all transformations, the text file If this option is used multiple times, each script is executed in the entered order. 

triarea  EXPR  Define the minimal area size of KCL triangles. The intention is to ignore triangles that are generally to small. 

triheight  EXPR  Define the minimal height of KCL triangles. The intention is to ignore deformed triangles (very slim, but long). triht is an alternative name for the option. 

flagfile  filename  Define a flag file if scanning an OBJ file (KCL processing). The file name may contain %escapes. Set it to an empty string to disable flag files at all.
The tool search the flag file in the following order until found: File defined by flagfile; OBJ file name with replaced extension ('a.obj' becomes 'a.flag'); OBJ file name with appended extension ('a.obj' becomes 'a.obj.flag'). 

slot  keyword  Patch a track file to run at the specified slot. KMP and KCL may be modified. BRRES files may be added to or removed from SZS. The main keywords are 