prevnext   » SZS: Wiimms SZS Toolset » wmdlt: Wiimms MDL Tool » wmdlt decode

wmdlt decode

Read the entered MDL files (text or binary) and decode them to text files. Wildcards and pipe characters are parsed. The default destination is '%P/%N.txt'.

A decoded MDL0 file can only be used for analysis. Encoding or creating a new MDL0 file is not supported.

Contents

1.   Syntax

wmdlt DECODE [source]...

2.   Options

Options
Option Param Description
--no-wildcards Disable wildcard parsing and use each filename exactly as specified.
--in-order Process the input files in order of the command line and don't delete duplicates.
-i --ignore Ignore non existing source files without warning.
-d --dest path Define a destination path (directory/file). The destination - means: write to standard output.

The path may contain escape sequences: %Q is replaced by the fully qualified source name. %P and %F are replaced by the source path or by the filename. %N and %E are replaced by source filename without extension or by the source extension. Finally, %T is replaced by the default extension of the destination format.

A '?' direct behind '%' in %E and %T conversions avoid that the same extension is used twice in row.

-D --DEST path Like --dest, but create the directory path automatically.
-E --esc char Define an alternative escape character for destination files. The default is '%'. For Windows batch files it is a good choice to set '-E$'.
-o --overwrite Overwrite already existing files without warning and ignore option --number.
--number If a file already exist, append a number directly before the file extension to make the filename unique. If other numbered files already exist (ignoring case), use the maximum existing index+1. --num is a short cut.
-r --remove-dest Remove already existing files before creating it. If set, --overwrite is ignored. --rm-dest is a short cut.
-u --update Update only existing files and don't create new files. If set, --overwrite and --remove-dest are ignored.
-p --preserve Preserve file times (atime+mtime) while converting or copying files.
-H --no-header Suppress the syntax information section in MDL text files.
-B --brief Suppress cross reference comments.
--no-echo Suppress output of @ECHO commands while scanning text files.
-N --no-check Do not make plausibility checks for KMP files.
--scale vector[@origin] Transform the data: Scale all coordinates and size values by 'vector' relative to the point 'origin'. If the origin is not set, 0,0,0 is used instead.

Negative values mirror the coordinates. Each parameter is either a vector expression or a comma separated expression list of coordinates ('x,z' or 'x,y,z').

Transformations are calculated in the order SCALE, SHIFT, ROTATE, TRANSLATE.

--shift vector Transform the data: Add 'vector' to all coordinates. It's simlar to --translate, but the addition is done before rotation. The parameter is either a vector expression or a comma separated expression list of coordinates ('x,z' or 'x,y,z').

Transformations are calculated in the order SCALE, SHIFT, ROTATE, TRANSLATE.

--xss x1old,x1new,x2old,x2new --xss (x-scale-shift) calculates the X values of --scale and --shift, so that old values are transformed to the new values. The parameters are numbers or expression.
--yss y1old,y1new,y2old,y2new --yss (y-scale-shift) calculates the Y values of --scale and --shift, so that old values are transformed to the new values. The parameters are numbers or expression.
--zss z1old,z1new,z2old,z2new --zss (z-scale-shift) calculates the Z values of --scale and --shift, so that old values are transformed to the new values. The parameters are numbers or expression.
--rot degree[@origin] Transform the data: Rotate all coordinates and rotation values by the angle 'degree' (is a vector) around the 3 axes. All 3 axes goes through the point 'origin'. If the origin is not set, 0,0,0 is used instead.

Each parameter is either a vector expression or a comma separated expression list of coordinates ('x,y,z').

Option --rot is an alternative for --xrot, --yrot and --zrot to define all 3 rotations in one step. Transformations are calculated in the order SCALE, SHIFT, X-ROTATE, Y-ROTATE, Z-ROTATE, TRANSLATE.

--xrot degree[@origin] Transform the data: Rotate all coordinates and rotation values by the angle 'degree' around the x-axis, that goes through the point 'origin'. If the origin is not set, 0,0,0 is used instead.

Each parameter is either a vector expression or a comma separated expression list of coordinates ('y,z' or 'x,y,z').

Transformations are calculated in the order SCALE, SHIFT, X-ROTATE, Y-ROTATE, Z-ROTATE, TRANSLATE.

--yrot degree[@origin] Transform the data: Rotate all coordinates and rotation values by the angle 'degree' around the x-axis, that goes through the point 'origin'. If the origin is not set, 0,0,0 is used instead. This is a horizontal counterclockwise rotation and the old option name --hrot can also used.

Each parameter is either a vector expression or a comma separated expression list of coordinates ('x,z' or 'x,y,z').

Transformations are calculated in the order SCALE, SHIFT, X-ROTATE, Y-ROTATE, Z-ROTATE, TRANSLATE.

--zrot degree[@origin] Transform the data: Rotate all coordinates and rotation values by the angle 'degree' around the z-axis, that goes through the point 'origin'. If the origin is not set, 0,0,0 is used instead.

Each parameter is either a vector expression or a comma separated expression list of coordinates ('x,y' or 'x,y,z').

Transformations are calculated in the order SCALE, SHIFT, X-ROTATE, Y-ROTATE, Z-ROTATE, TRANSLATE.

--translate vector Transform the data: Add 'vector' to all coordinates. It's simlar to --shift, but the addition is done after rotation. The parameter is either a vector expression or a comma separated expression list of coordinates ('x,z' or 'x,y,z'). --trans is a short cut.

Transformations are calculated in the order SCALE, SHIFT, ROTATE, TRANSLATE.

--null Create a neutral transformation without affecting the coordinates. The only influence is, that the dependent values (like maximum) are re-calculated as if a transformation has taken place.
--ascale factor@dir Transform the data and do an axis scale: Close the current transformation step like --next and scale the data by 'factor' into the direction given by the vector 'dir'. Store the resulting matrix as single transformation step and open a new one.

This kind of transformation is EXPERIMENTAL!

--arot degree[@pos1]@pos2 Transform the data and do an axis rotation: Close the current transformation step like --next and rotate the data by 'degree' around the axis defined by the 2 points. If 'pos1' is not set, use 0,0,0 instead. Store the resulting matrix as single transformation step and open a new one.

This kind of transformation is EXPERIMENTAL!

--tform-script script Load the script and execute it by the text parser.

Then for each coordinate (2D and 3D), call the macro TRANSFORM after all other transformations. Call it without parameters and set variable $I with a zero based index of all vertices, variable $D to the dimension (2 or 3) and the variable $P to the vector of the current vertex. If the macro returns a vector, it is the new position.

For each file, macro BEGIN is called at the beginning and END after processing all points, but only, if the macros are defined. For END, variable $I is set to the number of processed vertices in the current file.

Before each macro call, the private and local variables are cleared and only global parameters are permanent. The zero based index is cleared for each new source. The parameters of the macro calls are defined in the local name space.

--next Close the current transformation step with all scaling, shifting, rotation and translation options and open a new step with cleared options. On transformation each step is logical done one by one. In real, one total transformation matrix is calculated and used for fast transformations.

If option --next is used, the ability for modifying the scale and rotation vectors (not the positions) of different KMP sections is nearly always lost. A warning is printed if this occurs.

--mdl list Set global options for MDL processing. To enable MDL patching, use option --patch-files and select BRRES files for patching.

Parameter 'list' is a comma separated list of keywords. A minus sign before a keyword disables a setting. Each occurrence of the option will only change entered settings and all other settings are untouched.

A MDL transformation (controlled by the transformation options) is only done, if at least one of the keywords VECTOR or VERTEX is set.

Keyword DEFAULT resets the default settings (VERTEX) and CLEAR disables all. The other allowed keywords are: VECTOR, MATRIX, VERTEX, PARENT, CHILD and LOG.