prevnext   » SZS: Wiimms SZS Toolset » wkmpt: Wiimms KMP Tool » wkmpt decode

wkmpt decode

Read the entered KMP files (text or binary) and decode them to text files. Wildcards and pipe characters are parsed. The default destination is '%P/%N.txt'.

Contents

1.   Syntax

wkmpt DECODE [source]...

2.   Options

Options
Option Param Description
--no-wildcards Disable wildcard parsing and use each filename exactly as specified.
--in-order Process the input files in order of the command line and don't delete duplicates.
-i --ignore Ignore non existing source files without warning.
-d --dest path Define a destination path (directory/file). The destination - means: write to standard output.

The path may contain escape sequences: %Q is replaced by the fully qualified source name. %P and %F are replaced by the source path or by the filename. %N and %E are replaced by source filename without extension or by the source extension. Finally, %T is replaced by the default extension of the destination format.

A '?' direct behind '%' in %E and %T conversions avoid that the same extension is used twice in row.

-D --DEST path Like --dest, but create the directory path automatically.
-E --esc char Define an alternative escape character for destination files. The default is '%'. For Windows batch files it is a good choice to set '-E$'.
-o --overwrite Overwrite already existing files without warning and ignore option --number.
--number If a file already exist, append a number directly before the file extension to make the filename unique. If other numbered files already exist (ignoring case), use the maximum existing index+1. --num is a short cut.
-r --remove-dest Remove already existing files before creating it. If set, --overwrite is ignored. --rm-dest is a short cut.
-u --update Update only existing files and don't create new files. If set, --overwrite and --remove-dest are ignored.
-p --preserve Preserve file times (atime+mtime) while converting or copying files.
-H --no-header Suppress the syntax information section in KMP text files.
-B --brief Suppress information lines in decoded KMP text files. This includes syntax information (--no-header). If set twice, the output of unneeded sections is also suppressed.
-X --export Enable the export mode and create small and machine readable text files for easy post processing. The option works similar like -HBB for KMP text files.
-P --no-param Disable parameter support in decoded KMP text files.
-G --generic Forget scanned entry names and use generic names for output.
--battle [=mode] MODE is either OFF, AUTO (default) or ON. Without value, ON is used.

If mode is ON, assume a battle arena and enable a special battle support. If mode is OFF, disable special battle arena support. If mode is AUTO, analyse the KMP and estimate, if it is a battle areana. Modes ON and OFF override KMP parameter BATTLE-MODE.

--export-flags [=mode] MODE is either OFF, AUTO (default) or ON. Without value, ON is used. --exflags is an alternative name for the option.

If mode is ON, this feature is forced: On creating a KMP text file, the option EXPORT-FLAGS is always set to 1. On creating a binary KMP file, the flags are always exported as lowest byte of the scale factors or x-rotation.

If mode is OFF, this feature is totally disabled. If mode is not AUTO, KMP parameter EXPORT-FLAGS is overridden.

--route-options [=mode] MODE is either OFF, AUTO (default) or ON. Without value, ON is used.

On mode ON, the new commands $PREV and $NEXT are printed for each group of KMP sections ENPT and ITPT. On mode AUTO, the command is only printed, if any option is set or if parameter SHOW-OPTIONS is >0. On mode OFF, this feature is totally disabled to create KMP text files that are compatible with versions <1.60a.

This option exists only for a transition period. Its behaviour will be changed in the future. --ropt is a short cut.

--wim0 [=mode] MODE is either OFF, AUTO (default) or ON. Without value, ON is used.

If mode is ON, a KMP section called WIM0 is added on binary KMP creation. The sections contains information for Wiimms tools.

If mode is OFF, this feature is totally disabled. If mode is not AUTO, KMP parameter KMP-WIM0 is overridden.

--no-echo Suppress output of @ECHO commands while scanning text files.
-N --no-check Do not make plausibility checks for KMP files.
-c --const list Define constant values, that are used by the internal encoders and by the numeric options as predefined global variables. This option allows a conditional encoding of text files. It can be used multiple times for multiple definitions.

The parameter is a comma separated list of terms and a term is 'name=expression'. The expression is calculated by the text parser.

--scale vector[@origin] Transform the data: Scale all coordinates and size values by 'vector' relative to the point 'origin'. If the origin is not set, 0,0,0 is used instead.

Negative values mirror the coordinates. Each parameter is either a vector expression or a comma separated expression list of coordinates ('x,z' or 'x,y,z').

Transformations are calculated in the order SCALE, SHIFT, ROTATE, TRANSLATE.

--shift vector Transform the data: Add 'vector' to all coordinates. It's simlar to --translate, but the addition is done before rotation. The parameter is either a vector expression or a comma separated expression list of coordinates ('x,z' or 'x,y,z').

Transformations are calculated in the order SCALE, SHIFT, ROTATE, TRANSLATE.

--xss x1old,x1new,x2old,x2new --xss (x-scale-shift) calculates the X values of --scale and --shift, so that old values are transformed to the new values. The parameters are numbers or expression.
--yss y1old,y1new,y2old,y2new --yss (y-scale-shift) calculates the Y values of --scale and --shift, so that old values are transformed to the new values. The parameters are numbers or expression.
--zss z1old,z1new,z2old,z2new --zss (z-scale-shift) calculates the Z values of --scale and --shift, so that old values are transformed to the new values. The parameters are numbers or expression.
--rot degree[@origin] Transform the data: Rotate all coordinates and rotation values by the angle 'degree' (is a vector) around the 3 axes. All 3 axes goes through the point 'origin'. If the origin is not set, 0,0,0 is used instead.

Each parameter is either a vector expression or a comma separated expression list of coordinates ('x,y,z').

Option --rot is an alternative for --xrot, --yrot and --zrot to define all 3 rotations in one step. Transformations are calculated in the order SCALE, SHIFT, X-ROTATE, Y-ROTATE, Z-ROTATE, TRANSLATE.

--xrot degree[@origin] Transform the data: Rotate all coordinates and rotation values by the angle 'degree' around the x-axis, that goes through the point 'origin'. If the origin is not set, 0,0,0 is used instead.

Each parameter is either a vector expression or a comma separated expression list of coordinates ('y,z' or 'x,y,z').

Transformations are calculated in the order SCALE, SHIFT, X-ROTATE, Y-ROTATE, Z-ROTATE, TRANSLATE.

--yrot degree[@origin] Transform the data: Rotate all coordinates and rotation values by the angle 'degree' around the x-axis, that goes through the point 'origin'. If the origin is not set, 0,0,0 is used instead. This is a horizontal counterclockwise rotation and the old option name --hrot can also used.

Each parameter is either a vector expression or a comma separated expression list of coordinates ('x,z' or 'x,y,z').

Transformations are calculated in the order SCALE, SHIFT, X-ROTATE, Y-ROTATE, Z-ROTATE, TRANSLATE.

--zrot degree[@origin] Transform the data: Rotate all coordinates and rotation values by the angle 'degree' around the z-axis, that goes through the point 'origin'. If the origin is not set, 0,0,0 is used instead.

Each parameter is either a vector expression or a comma separated expression list of coordinates ('x,y' or 'x,y,z').

Transformations are calculated in the order SCALE, SHIFT, X-ROTATE, Y-ROTATE, Z-ROTATE, TRANSLATE.

--ypos pos This option defines an Y position for KMP:CKPT transformations. It has only impact to X and Z rotations (Options --xrot and --zrot). If not set, the mean y of the active rotation origins are used.
--translate vector Transform the data: Add 'vector' to all coordinates. It's simlar to --shift, but the addition is done after rotation. The parameter is either a vector expression or a comma separated expression list of coordinates ('x,z' or 'x,y,z'). --trans is a short cut.

Transformations are calculated in the order SCALE, SHIFT, ROTATE, TRANSLATE.

--null Create a neutral transformation without affecting the coordinates. The only influence is, that the dependent values (like maximum) are re-calculated as if a transformation has taken place.
--next Close the current transformation step with all scaling, shifting, rotation and translation options and open a new step with cleared options. On transformation each step is logical done one by one. In real, one total transformation matrix is calculated and used for fast transformations.

If option --next is used, the ability for modifying the scale and rotation vectors (not the positions) of different KMP sections is nearly always lost. A warning is printed if this occurs.

--ascale factor@dir Transform the data and do an axis scale: Close the current transformation step like --next and scale the data by 'factor' into the direction given by the vector 'dir'. Store the resulting matrix as single transformation step and open a new one.

This kind of transformation is EXPERIMENTAL!

--arot degree[@pos1]@pos2 Transform the data and do an axis rotation: Close the current transformation step like --next and rotate the data by 'degree' around the axis defined by the 2 points. If 'pos1' is not set, use 0,0,0 instead. Store the resulting matrix as single transformation step and open a new one.

This kind of transformation is EXPERIMENTAL!

--tform-script script Load the script and execute it by the text parser.

Then for each coordinate (2D and 3D), call the macro TRANSFORM after all other transformations. Call it without parameters and set variable $I with a zero based index of all vertices, variable $D to the dimension (2 or 3) and the variable $P to the vector of the current vertex. If the macro returns a vector, it is the new position.

For each file, macro BEGIN is called at the beginning and END after processing all points, but only, if the macros are defined. For END, variable $I is set to the number of processed vertices in the current file.

Before each macro call, the private and local variables are cleared and only global parameters are permanent. The zero based index is cleared for each new source. The parameters of the macro calls are defined in the local name space.

--kmp list Set global options for KMP processing. Parameter 'list' is a comma separated list of keywords. A minus sign before a keyword disables a setting. Each occurrence of the option will only change entered settings and all other settings are untouched.

Keyword DEFAULT resets the default settings and CLEAR disables all. The other allowed keywords are: FORCE, NEW, RM-SPCITEM, LEFT, RIGHT, WIDE, NARROW, FIX-CKPH, FIX-ENPH, FIX-ITPH, FIX-PH, FIX-CKNEXT, FIX-CKJGPT, FIX-CK, FIX-ALL, MASK-PFLAGS, RM-LECODE, PURGE-GOBJ, FULL-DEFOBJ, DUMP-CLASS, DUMP-ONEWAY, DUMP-ALL, 1LAP .. 9LAPS, MAX-LAPS, RM-EMPTY, TINY-0 .. TINY-7, INPLACE, SILENT and LOG.

--speed-mod factor The speed modifier is a user extensions to change the basic speed of all vehicles. The speed factor itself is stored into KMP:STGI section of a track.

If --speed-mod is set to a value >0.0, then the last 2 bytes of the STGI section are patched. The value 0.0 reset these 2 bytes and deactivates the speed modifier.

--ktpt2 vector Insert or replace a second KTPT. Use VECTOR as new position. VECTOR is either X,Z or X,Y,Z or an expression. Set Y to 0 for an automatic defined height.

If the first 4 characters of VECTOR are 'AUTO' (ignoring case), then the position is calculated automatically and set to the recommendation of command wkmpt KTPT.

The tool looks for the nearest lap counter (CKPT with mode 0) and adjust the KTPT: The direction of the lap counter is copied and the KTPT is moved to the lap counter line using the new direction.

LE-CODE uses the second KTPT to draw the finish line at another place away from the start position.

--tform-kmp list Select KMP sections and objects for a transformation. --tkmp is a short cut. The option expects a comma separated list of keywords. Non ambiguous of keywords are allowed and minus signs within keywords are optional (e.g. GOBJS). A minus sign before a keyword disables transformation of the related section or object.

Sections are selected by the KMP section names AREA, CAME, CKPT, CNPT, ENPT, GOBJ, ITPT, JGPT, KTPT, MSPT and POTI.

Objects are selected by the keywords AREA-POSITION, AREA-ROTATE, AREA-SCALE, CAME-POSITION, CKPT-POSITION, CNPT-POSITION, CNPT-ROTATE, ENPT-POSITION, ENPT-SCALE, GOBJ-POSITION, GOBJ-ROTATE, GOBJ-SCALE, ITPT-POSITION, ITPT-SCALE, JGPT-POSITION, JGPT-ROTATE, KTPT-POSITION, KTPT-ROTATE, MSPT-POSITION, MSPT-ROTATE and POTI-POSITION.

The keywords NONE and ALL (default) complete the field.

--repair-xpflags file Load a KMP file and use it to repair the settings of the extended presence flags, if they are destroyed by another KMP tool. --repxpf is a short cut for this option.
--rm-gobj objlist Remove objects from the KMP section GOBJ. Therefor a comma separated object list with single values like 'a' or ranges like 'a:b' is expected. 'a' and 'b' are numbers, object names (prefixed by 'o$') or any other parser expressions.
--slot keyword Patch a track file to run at the specified slot. KMP and KCL may be modified. BRRES files may be added to or removed from SZS. The main keywords are DAISY, DESERT, SHERBET, SHYGUY, STANDARD and MOST. Slot numbers (except '42' and '4.2') and different other track names are also accepted. For some conversions, the auto-add library is needed.
--load-kcl file Load a KCL or OBJ file for reference issues.