prev

next

» SZS: Wiimms SZS Toolset » wszst: Wiimms SZS Tool » wszst list-la

Wiimms SZS Tools

Privacy Statement

Tools

wszst commands

decompress, dec

distribution, dis

is-arena, isarena

is-texture, istexture

list-la, lla

name-ref, nameref

normalize, norm

vr-calc, vrcalc

vr-race, vrrace

wszst list-la

List recursive all sub files with offset and size. 'LIST-LA' and 'LLA' are short cuts for »LIST --long --long --all --all«. Wildcards and pipe characters are parsed.

Contents

1. Syntax
2. Options

1. Syntax

wszst LIST-LA [source]...

2. Options

Options
Option		Param	Description
	`--no-wildcards`		Disable wildcard parsing and use each filename exactly as specified.
	`--in-order`		Process the input files in order of the command line and don't delete duplicates.
`-R`	`--recurse`	[=level]	If a extracted file is a known and supported archive, than extract it recursively until the entered level is reached. Level 0 (=NONE) deactivates this. If --recurse is used without parameter, then UNLIMITED is assumed. -R does'nt accept a parameter and is a short cut for --recurse=unlimited.
`-i`	`--ignore`		Ignore non existing source files without warning.
`-e`	`--ext`		For BRRES archives only: If a file is extracted, add a handy file extension like '.mdl' to the file name. If set twice and a textual file magic is available, use the file magic in lower case instead like '.mdl0'.
	`--cut`		Cut different non archive files into smaller peaces (logical units like headers, groups, sections) or list these peaces as single sub files for a more detailed analysis. Supported file types are BMG, BREFT-IMG, KMP, PAT, TEX, TPL, BRRES sub files and more.
`-a`	`--all`		Extract and decode all known and supported files recursively. This is a short cut for »--recurse --decode --mipmaps«. If entered twice, option --cut is included too.
`-l`	`--long`		If set, the size of each file is printed. If set twice, offset and size are printed. If set three times, debugging mode is enabled.
`-S`	`--sort`	mode	Define a sort mode. Allowed keywords are: NONE (default), NAME, OFFSET, U8, PACK, BRRES, BREFT and AUTO
`-H`	`--no-header`		Suppress printing of header and footer.
	`--ignore-setup`		Ignore hidden setup file 'wszst-setup.txt'. This file is used to determine some default settings and to find out sub archives and files to encode. Use this option only if you know what you do.
	`--u8`		Create an U8 archive, if possible. If the source is a WU8 archive, convert it to an U8 archive. This is the default if the setup file 'wszst-setup.txt' has no other definition. The default compression mode is set to Yaz0 (see --yaz0).
	`--wu8`		Create a WU8 archive, if possible. If the source is an U8 archive, convert it to a WU8 archive.
	`--pack`		Create a PACK archive.
	`--brres`		Create a BRRES archive.
	`--breff`		Create a BREFF archive.
	`--breft`		Create a BREFT archive.
	`--yaz0`		If creating a compressed file, force Yaz0 compression. Yaz0 compression is the default, if no compression method is defined by option or setup file.
	`--yaz1`		If creating a compressed file, force Yaz1 compression. The difference to Yaz0 is only the magic, which is set to 'Yaz1'.
	`--bz`		If creating a compressed file, force BZ compression (a YAZ0 like file format with BZIP2 compression).
	`--bzip2`		If creating a compressed file, create a BZIP2 compatible file.
	`--lz`		If creating a compressed file, force BZ compression (a YAZ0 like file format with LZMA compression).
	`--lzma`		If creating a compressed file, create a LZMA compatible file.
	`--szs`		Short cut for »--u8 --yaz0«: Create an U8 archive, if possible, and set the compression method to Yaz0.
	`--wbz`		Short cut for »--wu8 --bz«: Create a WU8 archive, if possible, and set the compression method to BZ.
	`--wlz`		Short cut for »--wu8 --lz«: Create a WU8 archive, if possible, and set the compression method to LZ.
	`--lfl`		Create a LFL (LE-CODE File List) archive.
	`--pt-dir`	[=mode]	Set one of the `point directory' modes REMOVE (=0), FORCE (=1) or AUTO (default). If --pt-dir is used without parameter, then FORCE is assumed. This option is only relevant if creating an U8 archive. It decides, if a special directory with name '.' will be added as base for all other files.
	`--links`		Support hardlinks while creating U8 and WU8 archives. Keep hardlinks if normalizing U8 and WU8 archives. On extracting, search hardlinks in every archive and try to create hardlinks at local file system.
	`--rm-aiparam`		Remove the directory AIParam and all files from the archive. This option has only impact, if creating a new archive or normalizing an existing archive. --rmai is a short cut.
	`--align-u8`	size	Define an align value for the sub files in U8 archives. The value must be a power of 2 and the default value is 32 (0x20) This value is only relevant if creating or normalizing U8 archives.
	`--align-lta`	size	Define an align value for the sub files in LTA archives. The value must be a power of 2 and the default value is 32 (0x20) This value is only relevant if creating LTA archives.
	`--align-pack`	size	Define an align value for the sub files in PACK archives. The value must be a power of 2 and the default value is 32 (0x20) This value is only relevant if creating or normalizing OACK archives.
	`--align-brres`	size	Define an align value for the sub files in BRRES archives. The value must be a power of 2 and the default value is 4 This value is only relevant if creating or normalizing BRRES archives.
	`--align-breff`	size	Define an align value for the sub files in BREFF archives. The value must be a power of 2 and the default value is 4 This value is only relevant if creating or normalizing BREFF archives.
	`--align-breft`	size	Define an align value for the sub files in BREFT archives. The value must be a power of 2 and the default value is 0x20 This value is only relevant if creating or normalizing BREFT archives.
	`--align`	size	Define an align value for the sub files in all archives. This is a short cut for »--align-u8=size {--align-lta=size --align-pack=size --align-brres=size --align-breff=size --align-breft=size«.
`-L`	`--logging`		This debug option enables the logging of internal lists and maps. Set it up to three times to be more verbose.
`-Y`	`--extended-errors`		Enable extended error messages. This includes a source file and line reference. Logging level 1 activates it too. --xerr is a short cut.
	`--timing`		Activate the timing of some operations. Logging level 3 activates them too.
	`--encode-all`		Encode all files. Normally a file is only encoded, if the source is younger than the destination or the destination is missing. Only files in the [encode] section of the file 'wszst-setup.txt' are candidates for encoding. --eall is a short cut. Option --no-encode takes precedence over --encode-all.
	`--encode-img`		Encode all image files. Normally a image file is only encoded, if the source is younger than the destination or the destination is missing. Only files in the [encode] section of the file 'wszst-setup.txt' are candidates for encoding. --eimg is a short cut. If set, option --no-encode is ignored for images.
	`--no-encode`		Do not encode files before creating an archive. --noenc is a short cut. Option --no-encode takes precedence over --encode-all, but --encode-img takes precedence for images.
	`--no-recurse`		Do not create archives recursively. Normally files in the [create] section of the file 'wszst-setup.txt' are created first. --norec is a short cut.
	`--no-echo`		Suppress output of @ECHO commands while scanning text files.
`-N`	`--no-check`		Do not make plausibility checks for KCL and KMP files.
`-x`	`--transform`	list	Convert image formats. A comma separated list with terms is expected. A term have the syntax '[SRC=]DEST'. It means: convert SRC format into DEST format. If SRC= is not set, the destination format is used for all source formats. This makes only sense as last rule. If DEST is empty no transformation is done for the source. Examples: 'TPL' or 'GRAY' or 'BTI.IA8' or 'TPL.I4+I8=IA8,TEX=,CMPR' SRC and DEST are tuples of file, image and palette formats and of 2 more attributes. All parts are optional and separated by points, the order is irrelevant. Allowed file formats are: TPL, TEX, BTI, BREFT-IMG (=BTIMG), PNG (import). Allowed image formats are: I4, I8, IA4, IA8, RGB565 (=R565), RGB5A3 (=R3), RGBA32 (=R32), C4, C8, C14X2, CMPR. Allowed palette formats are: P-IA8 (=P8), P-RGB565 (=P565), P-RGB5A3 (=P3). Attributtes are PALETTE, NO-PALETTE, GRAY, COLOR, ALPHA and NO-ALPHA. All terms are managed as list. For each graphic the list is iterated until the first SRC tuple of a term matches the graphic. Then the destination tuple is used for the transformation. The command »wimgt TEST« prints a clearly arranged readable table as result of this option.
	`--strip`		If creating a PNG file, don't add comments about creator and source formats.
	`--auto-add`		Analyze the KMP (if exist) and add missing BRRES, BREFF, BREFT, BRASD and KCL files automatically, if the tool can find the files in any sub directory named 'auto-add'. This sub directory is searched in all directories of 'SEARCH_PATH'; use command »wszst AUTOADD« to view them. Command »wszst AUTOADD« may also create an auto-add database. --aadd is a short cut.
	`--mipmaps`		If reading a source, scan for mipmaps and load them too. For PNG files, files named NAME.mm#.EXT with #=1.. are searched. This is the default. --mm is a short cut.
	`--no-mipmaps`		If reading a source, ignore mipmaps. This disables not the creation of mipmaps (see -n-mipmaps). --no-mm is a short cut.
	`--n-mipmaps`	num	Force the number of mipmaps. Values between 0 and 20 are allowed. Value OFF (default) disables this option. If enabled, options --max-mipmaps and --mipmap-size are ignored. The creation of mipmaps stops if the width or the height of the mipmap becomes 0. --n-mm is a short cut.
	`--max-mipmaps`	num	Control the automatic mipmap creation. Values between 0 and 20 are allowed and the default is 4. The mipmap creation for an image stops, if the set number is reached. This option is ignored, if --n-mipmaps is enabled. --max-mm is a short cut.
	`--mipmap-size`	num	Define the minimal width and minimal height of a generated mipmap. Any value >0 is allowed. The default is 8. This option is ignored, if --n-mipmaps is enabled. --mm-size is a short cut.
	`--fast-mipmaps`		If resizing an image, use the old fast resize algorithm (default until v1.64a) instead of the new smart one. Both algorithms differ only, when creating a mipmap for images with odd width or odd height. The old algorithm is faster (factor 2-4) than the default algorithm, but the new algorithm creates better resized images. --fast-mm is a short cut.
	`--cmpr-default`	rgb1[,rgb2]	Define 2 colors for the case, that all 16 pixels of a CMPR block are transparent. The default is to calculate an average color of all transparent pixels. Before v2.04 white was used. 2 RGB values (hex values with 6 digits each) are expected as parameter. If optional RGB2 is missed, a copy of RGB1 is used. As first step, both colors are converted to RGB565 colors C1 and C2 and sorted, so that C1<C2 (mandatory for CMPR). If C1 and C2 are identical, the least significant bit of green is cleared for C1 and set for C2. Use parameter '0' to force black, '-1' to force white, or '-' to reset to auto calculation.
`-n`	`--norm`		The uncompressed data will be normalized. See command NORMALIZE for more details.
	`--slot`	keyword	Patch a track file to run at the specified slot. KMP and KCL may be modified. BRRES files may be added to or removed from SZS. The main keywords are DAISY, DESERT, SHERBET, SHYGUY, STANDARD and MOST. Slot numbers (except '42' and '4.2') and different other track names are also accepted. For some conversions, the auto-add library is needed.